AutoCAD is one of software application which almost use in a technique world. Most of the technique people or the student inside absolutely has been well-known with this application. So, without any doubt, let’s create pipe using sweep Feature Command and also using substract feature command in AutoCAD.

Here are the Steps How to Create Pipe Using Sweep Feature Command in AutoCAD

1. To create pipe using sweep feature in this app, the first way that you have to do is open AutoCAD at your personal computer or on your laptop.

2. After that, create 2 circles with a suitable diameter (out and in) side based on the pipe that you want to draw. Click Circle icon or type C enter, and click left of your mouse to your laptop screen or computer. that one will be center point of circle. Make 2 circle, just take the example, we create circle with radius 180 mm of the outside and the 160 mm of the inside.

Create Pipe Using Sweep Feature Command

3. After that, create a long line which the length based on the length of the pipe that you will make. For example, just make it for 3000 mm

Create Pipe Using Sweep Feature

4. If you have been drawing both of them, after that type SW on the command bar, then click enter or click Sweep feature.

5. After that click both of circles, then click enter.

6. Click the line that you just have drawn, then the pipe will automatically be made. Click isometric view or rotate the part so that you can look at the pipe like 3D.

Create Pipe Using Sweep Feature

7. To make a hole of the pipe, the next option that we need to use by using Subtract feature command.

  • On the command bar, type SUBTRACT then click enter or type SUB then enter.
  • Click the outside part of the pipe or the biggest diameter of them then click Enter.

  • Click the inner pipe or the smallest diameter of them, then click enter.

Create Pipe Using Sweep Feature

  • The pipe is already made.
  • Click the Conceptual Visual Style, it aimed for it will looked like 3D

Create Pipe Using Sweep Feature

Well, those some ways to create pipe using sweep feature command and substract feature command was so easy and fast, isn’t it? Hopefully, you can try it by yourself. Goodluck and cheerio!!

LEAVE A REPLY

Please enter your comment!
Please enter your name here